CH8750 Compatibility
The CH8750 housing is intended for compact industrial cameras with larger or wide-angle lenses. The camera is placed in a 50 mm rear section and the lens in an 87 mm front section with an 83 mm front window.
CH8750 small cameras large lenses 83 mm window custom length
Not sure about compatibility?
Send us the camera and lens model, technical drawing, or 3D model of the assembly. We will recommend a suitable housing configuration.
1
Basic compatibility of the camera assembly
H Camera height
Designed for small industrial cameras. Use CH50-style camera compatibility as a starting point and verify the exact model. [TO BE COMPLETED / VERIFY]
W Camera width
Rear camera section inner diameter: 50 mm. Verify connector position and camera width before ordering.
Ø Lens diameter
Front lens section inner diameter: 87 mm. Front window diameter: 83 mm.
Please note: Lens locking screws When checking compatibility, always consider the maximum lens width, including locking screws, filters, adapters, and other elements of the optical assembly.
2
Front cap and optical access
The large front window is intended to reduce image cropping with larger and wide-angle lenses.
large window 83 mm front window
Suitable for many large-lens and wide-angle applications where smaller windows may crop the image.
custom optical solution Alternative front glass [TO BE COMPLETED]
For IR, SWIR, or other wavelengths outside the visible spectrum, verify the required glass material before ordering.
Please note: Certification The source product page states that CH8750 was not yet officially certified as a standalone product. Verify the current status before publishing IP69/IP69K claims.
Please note: Wide-angle lenses Position the camera assembly as close as practical to the front window and verify the field of view with the final lens.
3
Housing length
The housing length must be selected according to the complete camera and lens assembly.
F
Front body
The front section is intended for the lens and has an inner diameter of 87 mm.
B
Back body
The rear section is intended for the camera and has an inner diameter of 50 mm.
10
Custom length
The length is selected individually. Specify the camera and lens type or preferred dimensions in the order.
Please note: Cables Leave enough free space behind the camera for safe cable routing and connector handling.
4
Cable gland / back cap
to be specified Cable gland / back cap [TO BE COMPLETED]
The final cable gland or back cap specification was not available in the provided materials.
custom Custom cable entry
If the connector or cable layout is unusual, specify the exact camera, connector, and cable dimensions.
5
Camera mounting kit
standard Camera mounting for compact cameras
The camera is fixed to the internal mounting part with M2 or M3 screws. Standard preparation is for M2 with 18 mm pitch.
custom M3 / custom spacing
For other cameras, specify the exact camera type in the order so the correct M3 spacing can be prepared.
Please note: Camera mounting If the camera mounting holes do not match the standard mount, specify the exact camera model in the order or request a custom mounting solution.
6
Possible modifications
Custom lengthHousing length can be prepared according to the complete camera and lens assembly.
Custom camera mountingMounting can be adapted when the camera does not match the default hole spacing.
Custom optical materialDifferent glass materials may be needed for non-visible wavelengths. [TO BE COMPLETED]
7
Examples of compatible camera models
The models listed below are intended as indicative examples. Always verify the complete camera, lens, cable, and accessory dimensions before ordering.
Compatible camera examples
- Small industrial cameras in the CH50 compatibility range
- Basler ace / ace 2 compact models
- Cognex CIC compact models
- Allied Vision Mako / Guppy compact models
- LUCID Triton / Phoenix compact models
