CHS50 Compatibility
The CHS50 stainless steel housing is designed for small industrial cameras used in demanding industrial, food, and chemical environments. Compatibility depends on the camera body, lens diameter, cable gland insert, and available space for lens adjustment.
CHS50 small industrial cameras IP68 5 bar 50 mm inner housing 38 mm window
Not sure about compatibility?
Send us the camera and lens model, technical drawing, or 3D model of the assembly. We will recommend a suitable housing configuration.
1
Basic compatibility of the camera assembly
H Camera height
Small industrial cameras. Exact standard height range: [TO BE COMPLETED / VERIFY].
W Camera width
Inner housing diameter: 50 mm. Verify the maximum camera width including connectors and mounting features.
Ø Window / lens diameter
Window diameter: 38 mm. Verify the lens diameter, lens locking screws, and field of view.
Please note: Lens locking screws When checking compatibility, always consider the maximum lens width, including locking screws, filters, adapters, and other elements of the optical assembly.
2
Front cap and optical access
The stainless steel front section is designed for protection and easy lens adjustment. Verify the required optical access and field of view before ordering.
standard 38 mm front window
Standard CHS50 front window diameter for small industrial camera assemblies.
custom optical solution Alternative front window [TO BE COMPLETED]
For non-standard wavelengths or demanding optical requirements, verify the required glass or window material.
Please note: Hygiene and cleaning For food or chemical environments, verify cleaning agents, temperature, and any regulatory requirements for the final installation.
Please note: Field of view The 38 mm window may be limiting for some wide-angle lenses; verify the optical path before ordering.
3
Housing length
The housing length must be selected according to the complete camera and lens assembly.
L
Housing length
Standard length and internal clearances: [TO BE COMPLETED]. Verify the complete camera and lens assembly.
C
Connector space
Leave enough space behind the camera for cable connection and safe routing.
A
Adjustment access
The front part is adapted for lens adjustment; verify access with the selected lens and locking screws.
Please note: Cables Leave enough free space behind the camera for safe cable routing and connector handling.
4
Cable gland / back cap
included Cable gland with 1 or 2 cable insert
Cable gland insert for 1 or 2 cables Ø 4–6 mm.
custom Custom cable entry [TO BE COMPLETED]
Specify the exact number of cables, cable diameters, and connector dimensions if a non-standard solution is required.
5
Camera mounting kit
included Camera spacer
Spacer for securing the camera inside the housing.
included M2 and M3 screws
2× M2×6 and 2× M3×6 screws are included for fixing the camera to the fixed part of the spacer.
Please note: Camera mounting If the camera mounting holes do not match the standard mount, specify the exact camera model in the order or request a custom mounting solution.
6
Possible modifications
Custom mountingCustom camera mounting may be needed for cameras with non-standard geometry or screw positions.
Custom cable glandCable gland insert can be reviewed for unusual cable diameters or cable counts. [TO BE COMPLETED]
Custom optical windowAlternative front window material can be reviewed for special wavelengths. [TO BE COMPLETED]
7
Examples of compatible camera models
The models listed below are intended as indicative examples. Always verify the complete camera, lens, cable, and accessory dimensions before ordering.
Standard mount examples
- Basler ace acA640
- Basler ace 2 a2A1920
- Cognex CIC-10MR
- Cognex CIC-5000
- Allied Vision Mako G-030
- Allied Vision Guppy PRO F-125
Other examples
- LUCID Triton TRI200S
- FLIR Blackfly
- Keyence CV-3000 CV-035
- The Imaging Source DxK 33UJ003
- IDS uEye xx-5040CP
- Daheng MER2-302-37G
- Baumer VCXU 123
